Yard-Man 1050-7 User Manual download pdf (Page 11)

Technical specifications:

Connection Engine power Splitting lift

Split wood length

(without splitting

cross)

Split wood length

(with splitting cross)

Hydraulic pressure

Splitting force Weight

Safety instructions

The appliance (#01996) meets EN 61000-3-11 requirements and is subject to special connection conditions. That means that use on

optionally selected connection points is inadmissible. The appliance can lead to occasional voltage fluctuations under unfavourable

power conditions. The appliance is only designated to be used for connection points not exceeding the maximum allowed impedance of

Zmax = 0,233 Ω. As a user, you must make sure your connection point on which you want to use the appliance meets the above-

mentioned requirements - after agreement with your electricity supplier if necessary.

General

For safety reasons, safety instructions mentioned in these Operating Instructions and instructions on the appliance regarding the

operation, maintenance and repairs must be respected and followed.

Operating personnel

Risks may be associated with using the log splitter. Therefore, only trained and experienced persons may handle and work

with the appliance. The operator must wear tight, close-fitting clothing and protective shoes.

Persons below 18 years of age must not work with the wood splitter. However, persons over 16 years of age may work with

the wood splitter to achieve the learning goal and if supervision by a professional is provided.

Place of work

To ensure safe wood splitting, it is necessary that the place of work is level and enables stability keeping and sufficient free movement.

All obstacles must be removed from access paths for carrying the splitter. Appropriate lighting of the place of work must be provided.

Work preparation

Electric current supply must be interrupted by unplugging the appliance and pressing the red button for repairs or servicing the log

splitter. Interrupting the electric current supply just by putting the switch to OFF is not enough. GÜDE log splitters are always

supplied with hardened splitting knives. However, if slight deformation of the knife edge after splitting wood containing invisible foreign

items, e.g. out of concrete, steel, etc., it must be removed by a file or grinding off. Keeping the splitting knife sharp at all times increases

the operating power.

TIP: Lubricate the splitting knife with grease from time to time (for problem wood).

Before the splitter is put into operation for the first time, it is necessary to check the safety devices (two-lever operation, in

particular).

CAUTION! Before the appliance is to be put into operation, make sure the splitter table is fitted safely on the splitter.

Technical specifications:

Technical specifications: 1050/7 TCW type 1050/8 TC type

Connection: 230 V~50 Hz 400 V~50 Hz

Engine power 3,5 kW P1 3.5 kW P1

Max. hydraulic pressure: 210 bar 210 bar

Max. splitting force: 7 tons 8 tons

Splitting post: 100 mm x 100 mm 100 mm x 100 mm

Max. splitting lift: 515 mm 515 mm

Max. split wood length:

1040 mm (without splitting

cross)

1,040 mm (without splitting

cross)

Max. split wood length:

1020 mm (without splitting

cross)

1,020 mm (without splitting

cross)

In table position – splits: ca. 540 mm 540 mm

Table size: ca. 310 mm x 300 mm 310 mm x 300 mm

Total height: ca. 1540 mm 1,540 mm

Total depth including operating

lever:

ca. 840 mm 900 mm

Total width: ca. 600 mm 600 mm

Weight: ca. 113 kg app. 121 kg

Article No. 01996 01963

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 64 65

Comments to this Manuals

No comments

Yard-Man 1050-7 User Manual Page 11

Comments to this Manuals

Related products and manuals for Lawnmowers Yard-Man 1050-7