Yard-man 772C0710 600 User Manual download pdf (Page 8)

SECTION 3: KNOWING YOUR SNOW THROWER

Figure 10

WARNING: Read, understand, and follow

all instructions and warnings on the machine

and in this manual before operating.

NOTE: For detailed starting instructions and more

information on all engine controls, refer to the separate

engine manual packed with your unit

Shift Lever

The shift lever is located in the center of the handle

panel and is used to determine gorund speed and

direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is the

slowest and position five (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the slower

and two (2) is the faster.

Choke Control

The choke control is found on the rear of the engine and

is activated by rotating the knob clockwise. Activating

the choke control closes the choke plate on the

carburetor and aids in starting the engine.

Throttle Control

The throttle control is located on the

engine. It regulates the speed of the

engine and will shut off the engine

when pushed down completely.

Primer

Depressing the primer forces fuel

directly into the engine’s carburetor to

aid in cold-weather starting.

Oil Fill

Engine oil level can be checked and

oil added through the oil fill.

Ignition Key

The ignition key is a safety devise. It must be fully

inserted in order for the engine will start. Remove the

ignition key when the snow thrower is not in use.

IMPORTANT:

Do not attempt to turn the key.

Choke

Primer

Recoil Starter

Ignition

Drive Control

Auger Control

Shift Lever

Skid Shoe

Augers

Chute Assembly

Oil Fill

Gas Cap

Chute Directional

Control

Clean-out

Tool

Electric Starter Outlet

Key

Throttle

Control

Handle

Engine Controls

Electric Starter Button

Shave Plate

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Yard-man 772C0710 600 User Manual Page 8

Comments to this Manuals